CWH3 Canvas picture hangers pack of 4 (with screws)
-For art on stretchers and frames with Aluminium backs
-Fits frames with aluminium backs
-Guides speed alignment
-Unique design of hanger locates under the top bar of stretcher with two steel fingers and fixed with one or more screws
-Safe working load, based on tests: 11kg (when used in pairs)
-The cut-out in the square hanger allows it to fit over any picture hooks, nails, screws and lets the art hang flat on the wall
-For larger frames, or where there is a brace bar, fit two square hangers
-Steel, Silver finish
-Screws included
Fit in 4 simple steps:
1) Fix CWH Hangers to frame. Position and mark approximately 1/3 of the way down from the top. Put one screw in an oval hole of each.
2) Position and fix the wall hooks, place two Post-its in approximate hook positions. Check and mark hook positions on Post-its. Hold hook in position on mark. Use a light hammer to insert pins.
3) Hang frame in place on the hooks. Check for general position. To adjust for level, use screw in a slot. To lock CWH Hangers in position, insert second screw in each.
4) Frames hang flat and level on the wall - do not tip forward.
